Quality Inspector - Night Shift
PCC Aerostructures Auburn PCC Aerostructures Auburn Auburn, WA Auburn, WA Full-time Full-time $22.
00 - $32.
75 an hour $22.
00 - $32.
75 an hour 14 days ago 14 days ago 14 days ago NOTE:
In order for your application to be considered, you must apply through our Careers page at:
https:
//pcctalentacquisitionportal.
tal.
net/vx/lang-en-GB/mobile-0/appcentre-1/brand-7/xf-8ae01383538a/candidate/so/pm/1/pl/3/opp/10636-Quality-Inspector-Weekday-Night-Shift/en-GB Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp.
is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.
In addition, we are the leading producer of airfoil castings for the industrial gas turbine market.
We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.
With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E.
Buffett, acquired Precision Castparts Corp.
Job Description The Quality Inspector is able to fully read and interpret complex blueprints and engineering documentation and apply an advanced knowledge of manual tools.
The Quality Inspector is capable of a wide range of inspection activities including the inspection of machined parts, assemblies, raw material, heat treat, and outside processing.
Primary Duties &
Responsibilities:
Inspect fastener installation, sealant, raw material, simple machine parts, sheet metal parts, bushings, bearings, and standards, simple assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.
) Document FAI report Document non-conformances May occasionally perform special projects Other duties as assigned Required Skills:
Ability to be certified with Hardness and Eddy Current, Sealant, Bushing and bearing installation, electrical bonding, and fastener installation.
Proficient in basic computer skills Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying shop math skills such as trigonometry, ability to calculate dimensions, set sine plate, etc.
Basic understanding of BWMS (Business Quality Management System) processes and procedures Basic understanding of machine shop and aerospace assembly terminology and nomenclature Completion of Bushing and Bearing installation certification/evaluation Fully experienced with all basic and advanced manual inspection tools Ability to read and comprehend basic instructions and write simple correspondence Ability to read and understand technical and engineering material and communicate effectively with coworkers Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations Self-motivated with an ability to work alone or in a team environment Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals Required
Experience:
1-2 years of related experience Level of Education:
High school diploma or equivalent education Work Schedule:
Monday through Friday 2:
30 pm - 11:
00 pm Pay Range:
$22.
00-$32.
75 DOE.
Plus $1.
00/hr shift differential ITAR and EAR Disclosure This position requires use of information or access to production processes subject to national security controls under U.
S.
export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).
To be qualified to work in this facility, a successful application must be a U.
S.
Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work.
The U.
S.
export control regulations define a U.
S.
person as a U.
S.
Citizen, U.
S.
National, U.
S.
Permanent Resident (i.
e.
'Green Card Holder'), and certain categories of Political Asylees and Refugees.
For informational purposes only, the range of pay for this role is $22.
00 to $32.
75 US Dollar (USD) Hourly based on a variety of factors.
Employees working this shift are also eligible for a $1.
00/hr shift differential.
For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter.
Employees will receive 120 hours paid time off every year.
Employees will also receive 10 paid holidays.
Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance.
Employees are eligible to enroll in the Company's 401(k) plan.
Job Type:
Full-time Pay:
$22.
00 - $32.
75 per hour Expected hours:
40 per week
Benefits:
401(k) matching Dental insurance Employee discount Health insurance Health savings account Paid time off Referral program Retirement plan Tuition reimbursement Vision insurance Experience level:
1 year 2 years Schedule:
8 hour shift Monday to Friday Night shift Work setting:
In-person
Experience:
Quality inspection:
1 year (Required) Ability to Relocate:
Auburn, WA 98001:
Relocate before starting work (Required) Work Location:
In person The Quality Inspector is able to fully read and interpret complex blueprints and engineering documentation and apply an advanced knowledge of manual tools.
The Quality Inspector is capable of a wide range of inspection activities including the inspection of machined parts, assemblies, raw material, heat treat, and outside processing.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
00 - $32.
75 an hour $22.
00 - $32.
75 an hour 14 days ago 14 days ago 14 days ago NOTE:
In order for your application to be considered, you must apply through our Careers page at:
https:
//pcctalentacquisitionportal.
tal.
net/vx/lang-en-GB/mobile-0/appcentre-1/brand-7/xf-8ae01383538a/candidate/so/pm/1/pl/3/opp/10636-Quality-Inspector-Weekday-Night-Shift/en-GB Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp.
is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.
In addition, we are the leading producer of airfoil castings for the industrial gas turbine market.
We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.
With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E.
Buffett, acquired Precision Castparts Corp.
Job Description The Quality Inspector is able to fully read and interpret complex blueprints and engineering documentation and apply an advanced knowledge of manual tools.
The Quality Inspector is capable of a wide range of inspection activities including the inspection of machined parts, assemblies, raw material, heat treat, and outside processing.
Primary Duties &
Responsibilities:
Inspect fastener installation, sealant, raw material, simple machine parts, sheet metal parts, bushings, bearings, and standards, simple assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.
) Document FAI report Document non-conformances May occasionally perform special projects Other duties as assigned Required Skills:
Ability to be certified with Hardness and Eddy Current, Sealant, Bushing and bearing installation, electrical bonding, and fastener installation.
Proficient in basic computer skills Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying shop math skills such as trigonometry, ability to calculate dimensions, set sine plate, etc.
Basic understanding of BWMS (Business Quality Management System) processes and procedures Basic understanding of machine shop and aerospace assembly terminology and nomenclature Completion of Bushing and Bearing installation certification/evaluation Fully experienced with all basic and advanced manual inspection tools Ability to read and comprehend basic instructions and write simple correspondence Ability to read and understand technical and engineering material and communicate effectively with coworkers Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations Self-motivated with an ability to work alone or in a team environment Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals Required
Experience:
1-2 years of related experience Level of Education:
High school diploma or equivalent education Work Schedule:
Monday through Friday 2:
30 pm - 11:
00 pm Pay Range:
$22.
00-$32.
75 DOE.
Plus $1.
00/hr shift differential ITAR and EAR Disclosure This position requires use of information or access to production processes subject to national security controls under U.
S.
export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).
To be qualified to work in this facility, a successful application must be a U.
S.
Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work.
The U.
S.
export control regulations define a U.
S.
person as a U.
S.
Citizen, U.
S.
National, U.
S.
Permanent Resident (i.
e.
'Green Card Holder'), and certain categories of Political Asylees and Refugees.
For informational purposes only, the range of pay for this role is $22.
00 to $32.
75 US Dollar (USD) Hourly based on a variety of factors.
Employees working this shift are also eligible for a $1.
00/hr shift differential.
For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter.
Employees will receive 120 hours paid time off every year.
Employees will also receive 10 paid holidays.
Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance.
Employees are eligible to enroll in the Company's 401(k) plan.
Job Type:
Full-time Pay:
$22.
00 - $32.
75 per hour Expected hours:
40 per week
Benefits:
401(k) matching Dental insurance Employee discount Health insurance Health savings account Paid time off Referral program Retirement plan Tuition reimbursement Vision insurance Experience level:
1 year 2 years Schedule:
8 hour shift Monday to Friday Night shift Work setting:
In-person
Experience:
Quality inspection:
1 year (Required) Ability to Relocate:
Auburn, WA 98001:
Relocate before starting work (Required) Work Location:
In person The Quality Inspector is able to fully read and interpret complex blueprints and engineering documentation and apply an advanced knowledge of manual tools.
The Quality Inspector is capable of a wide range of inspection activities including the inspection of machined parts, assemblies, raw material, heat treat, and outside processing.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
